CASO Germany EO27 - Manual (Page 73)

caso EO 27 73
16.6 Tray and Grid
After broiling, remove the tray from the oven. Remove the grid from the
tray. Carefully pour out the grease from the tray into a proper container.
Wash and rinse the tray and grid in hot water with a soap-filled or plastic
scouring pad.
If food has burned on, sprinkle the grid with detergent while hot and cover
with wet paper towels or a dishcloth. Soaking the tray will remove burned-
on foods. Do not store a soiled tray and grid anywhere in the oven.
16.7 Control panel
It is a good idea to wipe the control panel after each use. Clean it with dry
soft cloth. Do not use abrasive cleansers, strong liquid cleansers, plastic
scouring pads or oven cleansers on the control panel-they will damage the
finish.
16.8 Stainless steel surfaces (on some models)
Do not use the stainless steel cleaners for it will scratch the surface. Use a
hot, damp cloth with a mild detergent suitable for stainless steel surfaces.
Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth.
If food soil remains, try a general kitchen cleaner. For hard-to-clean soil,
use a standard stainless steel cleaner. After cleaning, use a stainless steel
polish. Follow the product instructions for cleaning the stainless steel
surface.
16.9 Oven light bulb
Please note
► The glass cover (on some models) should be removed only when cold.
Wearing latex gloves may offer a better grip.
Before replacing the bulb, disconnect electrical power to the oven at the
main fuse or circuit breaker panel. Let the bulb cool completely before
removing it. For your safety, do not
touch a hot bulb with a damp cloth. If you do, the bulb will break.
To remove:
Turn the glass cover counterclockwise1/4 turn until the tabs of the glass
cover clear the grooves of the socket. Remove the bulb.
To replace:
Put in a new 25-watt appliance bulb. Place the tabs of the glass cover into
the grooves of the socket. Turn the glass cover clockwise1/4 turn.
•