CASO Germany EO27 - Manual (Page 55)

caso EO 27 55
• Grating
• Operating Instructions
Please note
► Examine the shipment for its completeness and for any visible
damages.
► Immediately notify the carrier, the insurance and the supplier about any
incomplete shipment or damages as a result of inadequate packaging
or due to transportation.
13.3 Disposal of the packaging
The packaging protects the device against damages during transit. The
packaging materials are selected in accordance with environmentally
compatible and recycling-related points of view and can therefore be
recycled.
Returning the packaging back to the material loop saves raw materials
and reduces the quantities of accumulated waste. Take any packaging
materials that are no longer required to “Green Dot” recycling collection
points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of
the guarantee period of the device, in order that the device can be re-
packaged properly in the event of a guarantee claim.
13.4 Setup
13.4.1 Important notes to the Installer
Please note
► Do not remove spacers (if equipped) on the side walls and/or on the
back of the built-in oven. These spacers center the oven in the space
provided. The oven must be centered to prevent excess heat build up
that may result in heat damage or fire.
► Base must be capable of supporting 80kg.
► Read all installation instructions before installing the built-in oven.
► Remove all packing material from the oven compartments before
connecting the electrical supply to the wall oven.
► Observe all governing codes and ordinances.
► Be sure to leave these instructions with the consumer.
► Oven door may be removed to facilitate installation.