Salter Brecknell 6700U Series (USB) - Manual (Page 72)

72 67XXU USB/Serial Scale Service Manual
7.6.4 Parameter Multi
Set the USER-COM-LYOUT parameter to mutli.
Output string frame
Command: W (57h 0dh), request current reading
W
1
W
2
W
3
W
4
W
5
W
6
U
1
U
2
U
3
U
4
U
5
Line number and content are determined by setting of USER-OUT-xxxx
H
1
H
2
H
3
H
4
USER-OUT-STATUS is set to YES
C
USER-OUT1/2-LINE is set to LINE1/2/3/4
-----
The number of lank lines is determined by USER-OUT-LINE setting
(1) The decimal point position is determined by CONFG-PRIM.D
(2) The unit position and bytes are determined by which current unit is used
(3) The details of refer to the content in User submenu
(4) In HOLD mode, if ADC conversion speed is set to high speed (80Hz) and USER-COM-
LYOUT is set to MULTI, the output from COM may be slower than the data processed by the
indicator. For "real time" data, select fewer output contents and set a higher baud rate for
C --- USER-OUT-LINE is set to LINE1/2/3/4
---
---The number of blank lines is determined by USER-OUT1/2-LINE setting
--- Last byte of string frame