Salter Brecknell CS-250 - Manual (Page 3)

CS-250 Series Chair Scales Service Manual
- 2 -
1. PRECAUTIONS
WARNING
DISCONNECT ALL POWER TO THIS UNIT
BEFORE INSTALLING, CLEANING, OR
SERVICING. FAILURE TO DO SO COULD
RESULT IN BODILY HARM OR DAMAGE THE
UNIT.
CAUTION

Permit only qualified persons to service the instrument

Before connecting or disconnecting any components, remove the
power.

Failure to observe these precautions bodily harm or damage to or
destruction of the equipment.

The chair scale is a precision electronic instrument, handle it
carefully.

Do not install the scale in direct sunlight.

Verify the local voltage and receptacle type are correct for
the scale.

Only use original adaptor, other could cause damage to the
scale.

Pluggable equipment must be installed near an easily
accessible socket outlet.

Avoid unstable power sources. Do not use near large users
of electricity such as welding equipment or large motors.

Avoid sudden temperature changes, vibration, wind and
water.

Avoid heavy RF noise.

Keep the scale clean