Salter Brecknell 750 Series - Manual (Page 7)

Page C-1
CHAPTER 1: INTRODUCTION TO THE S750 SERIES DIGITAL INDICATORS
The S750 Series Digital Indicator is a general purpose, industrial grade weight indicator featuring piece
counting operation and a custom unit. Four models are currently available, distinguishable by display type
and enclosure type. Table 1-1 shows the S750 series product matrix.
All models operate identically, can readout up to 50,000 display divisions and can supply enough current
for up to 8-350
Ω load cells. All setup parameters may be entered via the front panel keys, including
calibration.
If your Model S750 Series Digital Indicator is part of a complete floor scale or has been installed for you,
you may skip to Chapter 7 for operating instructions. Prior to using the indicator, please read this chapter
carefully and completely. Store the manual in a safe and convenient place so it will be available if you
have questions concerning the operation of the scale.
If you are an installer, the indicator's installation and wiring instructions are found in Chapter 2. The
indicator contains two main setup menus: The Setup (“F”) menu, which configures the indicator to your
weigh platform and the User (“A”) menu, which configures the serial communication port and enables
some user options. Chapter 3 gives an overview and explains how to use the five front panel keys to
maneuver and save settings in both menus. Chapters 4 and 5 explain the Setup and User Menu options,
respectively. Chapter 6 covers system calibration. Prior to installing the indicator, please read this manual
carefully and completely. Store the manual in a safe and convenient place so it will be available if you
have questions concerning the setup and operation of the scale.
MODEL DISPLAY TYPE ENCLOSURE TYPE
S750 LED (light emitting diode), 1.0" tall ABS, NEMA 12 rated
S750-8 LCD (liquid crystal display), 0.8" tall ABS, NEMA 12 rated
TI-S750S LED (light emitting diode), 1.0" tall Stainless Steel, NEMA 4X rated
TI-S750S-8 LCD (liquid crystal display), 0.8" tall Stainless Steel, NEMA 4X rated
TABLE 1-1: S750 Series Product Matrix
IMPORTANT NOTE: Piece counting is not available in the United States.