Salter Brecknell 200ES - Manual (Page 25)

5-2
200E and 200ES only
NAME/CODE DESCRIPTION CODE/VALUE
A10
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only
when A6 is set to “1”.
"0" = Disable Handshaking "1" = Enable Handshaking
0
√
1
A11
Print Header
Tells MP-20 printer to print the header information. Valid only when
A6
is set to “1”.
"0" = Do NOT Print Header "1" = Print Header
0
√
1
200 only
5
NAME/CODE DESCRIPTION CODE/VALUE
A10
Backlight
Enable
Allows you to permanently disable the backlight feature for outdoor
use. Factory default setting is “1” (Enabled).
"0" = Disabled “1" = Enabled
0 1 √
A11
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only
when A6 is set to “1”.
"0" = Disable Handshaking "1" = Enable Handshaking
0
√
1
A12
Print Header
Tells MP-20 printer to print the header information. Valid only when
A6
is set to “1”.
"0" = Do NOT Print Header "1" = Print Header
0
√
1
200BW only
NAME/CODE DESCRIPTION CODE/VALUE
A10
Auto Power Off
Period
Selects the auto off time period in minutes:
“Off” = Disabled (Always ON)
Off
√
3 5
10 20
30
A11
Hold Model
Enable
Activates the “Hold” mode where weight of the object on the platform
is frozen on the display until the applied weight is decreased to one-
half of the memorized weight. This is used in conjunction with the
Motion Band setting (F5) to capture an unstable load, such as
livestock.
“0” = Disabled, “1” = Enabled
0
√ 1
A12
4
Backlight
Enable
Allows you to permanently disable the backlight feature for outdoor
use. Factory default setting is “1” (Enabled).
"0" = Disabled “1" = Enabled
0 1 √
A13
Handshaking
Enable
Enables hardware handshaking for Print Ticket Mode. Valid only
when A6 is set to “1”.
"0" = Disable Handshaking "1" = Enable Handshaking
0
√
1
5 Won’t appear on older units.