2 recall a load from memory, Recall a load from memory – Salter Brecknell APD-100 User Manual
Page 21
APD-100 Automatic Powder Dispenser User Instructions
21
4.4 Load Memory
4.4.2 Recall a Load From Memory
Recall a load by scrolling through the cartridge names
1.
Press the RECALL key…
C=_ is displayed.
2.
Press the RECALL key again…
The first cartridge memory is displayed.
3.
Press FAST/^ or TRICKEL/v to scroll through the cartridge names. Press
ENTER to select the displayed cartridge name.
4.
The information stored for this cartridge flashes on the display then…
The MEM.xxx number is displayed for this cartridge.
5.
Press the ENTER key when MEM.xxx is displayed to dispense this load.
6.
Press the EXIT key to exit from memory mode and return to the standard
weighing and dispensing mode.
Recall a load using the cartridge name
1.
Press the RECALL key to recall a load in memory using the cartridge name…
C=__ is displayed.
2.
Key in the name of the cartridge using the keypad and press the ENTER key
to accept…
The cartridge name is displayed briefly and the load information scrolls
on the display. If more than one cartridge is stored in memory with the
same cartridge name, the first one stored will be displayed.
3.
To dispense this load, press ENTER key again.
4.
You can scroll to a different memory location to dispense a different load. To do
this press the FAST/^ key to choose the next location or press the TRICKEL/
v key to choose the previous location in the list of stored loads.
You can turn on the Auto Repeat function before selecting a load from memory or
after dispensing a load recalled from memory. See Auto Repeat Dispensing Mode
for more information.
WARNING: Be sure that the correct powder is in the reservoir
WARNING: Be sure that the correct powder is in the reservoir