AVer EB3004 NET & NET+ User Manual
Page 41
35
OSD MENU
Description
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
NETWORK
SYSTEM
NETWORK SETUP
Setup the network parameters for the internet or intranet remote monitor or
playback.
NETWORK SETUP
VIDEO PORT
IP MODE
UPGRADE PORT
STREAM SETUP
0080
STATIC
5005
IP MODE
The system provides 3 types of IP setup mode
– STATIC, DHCP, and
PPPOE.
-
STATIC: Assigns a constant IP address for the DVR system.
IP ADDRESS: Assign a constant IP address which a real IP
addresses give from ISP to DVR system.
SUBNET: It is used to identify the sub network and how
many bits provide room for addresses. Enter the subnet
mask of the IP address which user has assigned to DVR system.
GATEWAY: A network device act as a passageway to internet.
Enter the network gateway IP address
DNS: Domain Name Server translates domain names (such as
www.abb.com.tw) Enter the IP address of DNS if
it is available.
MAC ADDRESS: The hardware address of the DVR system.
Only for
information. Doesn
‟t need to enter the MAC address.
When all parameters are set, select the CHANGE to confirm the
configuration
.
NETWORK INFORMATION
GETWAY
192.168.1.254
MAC ADDRESS
00.00.00.00.00.00
CHAGNE
SUBNET 255.255.255.0
IP ADDRESS
192.168.1.3
-
DHCP: Assign the IP address by local DHCP server to DVR system.
i
The DHCP (Dynamic Host Configuration Protocol) is a set of rules
used by a communications device (such as or
networking adaptor) to allow the device to request and get an
Internet address from a server which has a list of addresses
available for assignment
-
PPPOE: Point-to-Point Protocol over Ethernet is for encapsulatinframes iframes. It is used mainly
wiservices. If your network is using ADSL service connecting
to internet, and then, select PPPOE mode.
VIDEO PORT
A port for the remote connection. Any port can be assigned as a video port,
except the ports already used by the network services. The default video
port is 80.