AVer EB3004 NET & NET+ - Manual (Page 22)

16
2.2 Using the DVR for the First Time
1. Make sure all devices and power cables are well connected.
2. Turn on the DVR unit by connecting the power cable into the power plug.
3. User should see the SYSTEM INITIALIZE window appear on the surveillance screen. The system
will do hard disk detection automatically.
4. For the first time use hard disk, please format the hard disk. Select HDD FORMAT and press
(YES) to format hard disk. If hard disk doesn‟t need to format, press (NO).
5. When is done, HDD FORMAT will show COMPLETE.
SYSTEM INITIALIZE
FW VERSION B3. 01. 01. 00. 01
HDD SIZE 476 , 918MB
HDD FORMAT YES(SELECT)/NO(MENU)
HDD STATUS WAIT . . . .
S Y S T E M I N I T I A L I Z E
F W V E R S I O N B 3 . 0 1 . 0 1 . 0 0 . 0 1
H D D S I Z E 4 7 6 , 9 1 8 M B
H D D F O R M A T C O M P L E T E
H D D S T A T U S W A I T . . . .
6. When hard disk format is done, please adjust the system date and time in order to have the correct
recording date and time.
7. Press to call up the OSD menu, and then, use and to select SYSTEM →
DATE/TIME and press to make a selection.
8. Press and use and to select the DATE FORMAT.
9. And then, adjust the DATE and TIME by using to make a selection and using
and to adjust the date and time.
DATE / TIME SETUP
DATE FORMAT
DATE
TIME
TIME SYNC
TIME ZONE
LAST SYNC TIME
DAYLIGHT SAVING
START
END
OFFSET
YYYY/MM/DD
2009 / 11 / 03
15 : 19 : 09
GMT +08 : 00
2009 / 01 / 01 00 : 00 : 00
2009 / 01 / 01 00 : 00 : 00
2009 / 01 / 01 00 : 00 : 00
00 : 00
FORCE SYNC
10. When is done, the DVR system is ready to record.