AVer EB3004 NET & NET+ - Manual (Page 36)

30
OSD MENU Description
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
NETWORK
SYSTEM
RECORD SCHEDULE
By default, in 24 hours, the recording schedule is set to always record every
hour. Refer to the table below to customize the recording condition.
Condition Description
NO RECORD Not recording at all.
ALWAYS Record non-stop.
SMART
Automatically switch to record at the frame rate of FPS
(alarm) that is setup in CAMERA CHANNEL SETTING
once an alarm is detected and if there is no motion, it
records at the frame rate of FPS that is setup in
CAMERA CHANNEL SETTING.
ALARM Start recording when the alarm is activated.
VARIED
When each channel has different recording schedule,
the schedule table will display as Green color (VARIED
RECORD).
CAMERA
Select a channel (1, 2, 3, or 4) or ALL for record schedule setup.
SET TO ALL
Select a recording condition – NO RECORD, ALAWAYS, SMART or
ALARM. Please refer to the above table for record condition description.
RECORD SCHEDULE
SUN
CAMERA
SET TO ALL
ALL
ALWAYS
MON
TUE
WED
THU
FRI
SAT
00 02 04 06 08 10 12 14 16 18 20 22 24
: ALARM RECORD
: SMART RECORD : VARIED RECORD
: NO RECORDING
MAIN MENU
CAMERA/RECORD
SCHEDULE
EVENT SETUP
DISPLAY
STORAGE
NETWORK
SYSTEM
EVENT SETUP
Configure alarm, sensor, and motion.
EVENT SETUP
ALARM SETTING
SENSOR SETTING
MOTION DETECTION