AVer EB3004 NET & NET+ - Manual (Page 27)

21
4. And then, select SEARCH AREA to mark an area to search. The
DVR system will only search the area block that user has marked.
Use the , , , and to move the block and
press or to confirm. To exit, press .
5. To start searching, select the SEARCH EXECUTION.
6. When the playback file is found, the DVR system will start playback
automatically.
SEARCH AREA SETUP SCREEN
Listed below are the symbols of recording condition that will display on surveillance screen while playback mode and
record mode:
A – Always Recording
It records non-stop and automatically continue recording when interrupted.
L – Alarm Recording
It records when the alarm has activated.
B – Button Recording
It records when the record button is pressed.
The “” play symbol would appear beside the channel number when you are in playback mode.