AVer EB3004 NET & NET+ User Manual
Page 39
33
OSD MENU
Description
STORAGE SETUP
HDD SIZE
HDD OVERWRITE
HDD USED
HDD FORMAT
VIDEO BACKUP
953 , 849MB
279MB 0%
HDD OVERWRITE
Enable/disable replacing the earliest recorded file when the hard disk space
runs out. By default, the HDD overwrite setting is enabled. If user has
enable the PASSWORD SETUP in SYSTEM SETUP, and then, a
password entered is required when change the HDD OVERWIRTE status.
The default password is 111111.
HDD SIZE
Display the total capacity of the hard disk.
HDD USED
Display the amount of space that has been used.
HDD FORMAT
For security purpose, you may have to enter the password to format hard
disk (The default password is 111111).
To format hard disk:
1. Use the
and
buttons to go up and down and
select HDD FORMAT. Then press
.
2. In the CHECK PASSWORD screen, press
. Then use
and
buttons to select the security combination number.
Press button again to make the selection.
3. To move the selection to the left and right, use
, and
buttons.
CHECK PASSWORD
ENTER PASSWORD
EXECUTE
4. After
entering the last number, the “PASSWORD CORRECT” appears,
you are now authorized to format the hard disk.
5.
It is done when the “FORMAT DISK SUCCESS” appears.
Formatting the hard disk will permanently delete all the recorded
files. The recorded files will be no longer for retrieving.