Making the connections – AVer CP300 User Manual
Page 11
E-5
English
Deut
sch
Français
It
aliano
Esp
a
ñol
Č
esky
M
M
a
a
k
k
i
i
n
n
g
g
t
t
h
h
e
e
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The ports on the rear, left and right panel of CP300 enable you to
connect the unit to a computer, graphics display monitor or LCD/DLP
projector, TV or other device. Illustrated below are the ports that are
located at the rear, left and right panel of CP300 with their corresponding
labels.
(2)(3)
(1)
Right Panel
(5) (6)(7)
(8)
(4)
(9)
Rear & Left Panel
(10)
Port
Description
(1) Antitheft Slot
Attach a Kensington compatible security lock or
antitheft device.
(2) Light Box
Plug the optional light box into this port.
(3) DC 12V Input
Connect the power adapter into this port.
(4) RGB INPUT
Input the signal from a computer or other sources
and pass it through to the RGB Output port only.
Connect this port to the VGA output port of the
computer.
(5) RGB OUTPUT
Output the signal from the camera, RGB input port,
or the captured images from the memory on a
VGA/Mac monitor or LCD/DLP projector.
(6) VIDEO OUTPUT
(RCA/Composite)
Output the signal from the camera or the captured
images from the memory on TV or Video
equipment.
(7) S-VIDEO
OUTPUT
Output the signal from the camera or the captured
images from the memory on TV or Video
equipment.
(8) DVI-I OUTPUT
Output the signal from the camera, RGB input port,
or the captured images from the memory on a
VGA/Mac monitor or LCD/DLP projector with DVI-I
interface.
If the display device does not support DVI-I, it can
only display the signal from the camera and the
captured images.