AVer F50 user manual - Manual (Page 8)

ENGLISH
3
Rear Panel
(5)
(4) (2)
(1)
(3)
(fig. 1.3)
Name Function
(1) DC12V Connect the power adapter into this port.
(2) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUT port only. Connect this port to the
RGB/VGA output port of a computer.
(3) RGB OUTPUT port
Connect the AVerVision F50 to any display device with RGB
cable
(4) RS-232/CVBS port
Connect the supplied RS-232/CVBS cable into this port. The
RCA jack outputs the video signal from the camera to a TV or
video equipment. The RS-232 jack is used to connect to
computer serial port or to any control panel or for centralized
control if desire.
(5) Mini USB port
Connect to a USB port of a computer with a USB cable and use
AVerVision F50 as a USB camera or transfer the captured
images/videos from the memory source to computer.
Left Panel
(5)
(4)
(3)
(2)
(1)
(fig. 1.4)
Name Function
(1) Speaker port
Connect to an amplified speaker to playback recorded audio &
video clip.
(2) MIC port
Connect a 3.5mm plug microphone. The built-in mic will be
disabled when an external MIC is connected to this port.
(3) USB port
Insert a USB flash drive save the images/video directly from the
USB flash drive or use a USB mouse to annotate.
(4) USB switch
Switch to for audio video recording directly to a USB flash
drive or use a USB mouse to annotate and when connecting
AVerVision F50 to a computer using a USB cable from the rear
USB port.