Canon Z155 - Manual (Page 12)

Close the back cover.
^The film will automatically
advance to the first frame
on the roll.
AUTO
“1 ” is displayed on the
frame counter.
• If the frame counter shows
a blinking “
0
”, the film did
not load correctly. Load the
film again.
Q] • Use only film with DX-code. The camera will
automatically detect and set the film speed.
• A film speed of ISO 4tX) Is recommended.
• The film speed Is set to ISO 25 when non^DX film Is
loaded. If the film does not have a DX-code, Insert It Into
the film compartment, close the back cover and press
the shutter button once or twice.
• For slide (reversal) film, you can use DX-coded film
speeds of ISO 25, 50, 100, 200, 400, 800, 1600 and
3200.
[1-12