Canon 318 M - Manual (Page 4)

г
TECHNICAL DATA
Type: 8mm movie camera using Super 8
film cartridge,
Picture Size: 5.8 x 4.2mm.
Projected Picture: 5.4 x 4.0mm.
Lens: FI.8 with zooming range of 10-30mm.
Zoom ratio. 1:3. 11-element in 9-component
construction
Macro Filming Mechanism: Close-up filming
is possible by resetting the zooming ring at
“M” index mark. Camera-to-subject distance;
22.5cm (8-7/8') from film plane Indicator.
Picture area : 10.4 x 7.5cm (4-1/8'x 2-15/16').
Focusing: By eye-measurement. Distance
scale and two snapshot marks indicated,
EE Mechanism: Automatic aperture setting
coupled to film speed and filming speed.
Exposure Meter: TTL metering system
using CdS photocell.
Metering Range: ASA 160, f,T.8, 18 fps—
ASA25, f,22. 18 fps.
Film Speeds: Automatically set with inser­
tion of film cartridge. Tungsten light ASA 40
or 160. Daylight, ASA 25 or 100.
Color Temperature Conversion; Built-in
Color Conversion A (CCA) filter makes pos­
sible the use of tungsten type color film
under daylight conditions. Under tungsten
light conditions cancel the CCA filter with
CCA Filter Cancellation Adapter.
Filming Speeds: 18 fps, and single frame.
Film Drive: By high performance micro­
motor.
Zooming : Power drive zooming coupled to
film drive, (Power drive zooming is possible
only during shutter release) Zooming
speed: approximately 5.5 seconds. Manually
operated zooming possible.
Power Source: Three 1.5v penlight (size
AA) batteries. (Commonly used for film drive,
power drive zooming, and CdS photocell )
Under normal temperature conditions, ap­
proximately 7 cartridges can be shot using
manganese batteries and approximately 14
cartridges can be shot using alkaline batteries.