Qi continuous s, 1 press the qli to display h, 2 shoot – Canon IXUS 750 User Manual
Page 40: 1press the qli to display h 2 shoot
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Qi Continuous S
Shooting Mode
31
In this mode, the camera shoots continuously while the shutter
button is held down.
If you use the recommended memory card*, you can shoot
continuously (smooth continuous shooting) at a set shooting
interval until the memory card is full (p. 117).
*Recommended Memory Card
Super high speed SDC-512 MSH memory card (sold separately)
immediately after a low level format (p. 23).
• This reflects standard shooting criteria established by Canon. Actual results
may vary according to the subject and shooting conditions.
• Even if continuous shooting suddenly stops, the memory card may not be
full.
1
Press the Qli to display H
2
Shoot.
>The camera will continue to record successive images while
the shutter button is fully pressed. Recording will cease
when the shutter button is released.
To Cancel Continuous Shooting
Press the Qi button twice to display S-
The interval between shots lengthens when the built-in
memory of the camera fills.
If the flash is used, the interval between shots lengthens
because the flash must charge.
38