Programmed image control (p.i.c.) – Canon EOS 600 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PROGRAMMED IMAGE CONTROL (P.I.C.)

Set the main
green mark

switch to the 2)

Hold the shooting mode se
lector down, and turn the elec

tronic input dial

3) A number corresponding to

the PI C photo will appear in
the display panel The number

increases as the dial is turned

Select the desired number

and release the shooting

mode selector

The P.l C number disappears after setting, press the shooting mode selector to recall the number

When using P I C , “P” will blink continuously at all settings from

2-7 This is not an indication o1

malfunction, but a reminder that #1, standard is not in use