Canon EOS 600 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MANUAL FILM SPEED SETTING

The camera automatically sets film speed by sensing the DX code marked on the film cartridge

(ISO 25-5000 according to the DX code ) The automatically-set film speed will appear in the display panel

while the film advances to the first usable frame When using film without a DX code, set the speed manually

by following these steps: (ISO 6-6400)

Set the main switch to either 2)
“A" or “((•))■’

Open the switch cover, and
press both the blue and yellow

buttons at the same time to

display the ISO film speed

number

3) Turn the electronic input dial

until your film speed appears

• The previously-set film speed

blinks if the film speed has not
been set. The warning stops

after correct film speed set
ting.