Mounting and detaching a lens wounting a leos, Lens, Detaching the – Canon 500N QD User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Wounting a Leos
i Remove the rear lens cap and the
* camera body cap by turning the
cap as shown by the arrow.
^ Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to AF.
• If the focus mode switch is set to MF (or M
on some lenses), autofocus will not
operate.
• While the lens autofocuses, do not touch
the rotating part of the lens.
^ Remove the front lens cap.
Detaching the
Lens
While
pressing
the
lens
release
button, turn the lens as shown by the
arrow until it stops, then remove the
lens.
12