Flash condition – Canon EOS 850 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Flash Condition;
1. Automatic fill-in flash when backlight is de
tected.
2. Automatic low-light flash
X-sync Shutter Speed;
1/60 - 1/125 sec. Sync. Timing: First curtain
sync. only.
Flash Control System;
TTL automatic control by metering light reflected
from the film surface.
Flash Coupling Range;
2.3 - 19.7ft/0.7 - 6.0m at ISO 100.
Charge Completion Indication;
"P” lights up. Release is locked during flash
charging.
Power Source for Built-in Flash;
Supplied by camera’s battery
Flash Contact;
Coupled directly to the camera on the accessory
shoe.
Automatic Flash;
Built-in flash or when using the Speedlite 160E.
Using the camera’s TTL program, the correct
aperture value is automatically set according
to the brightness of the subject. X-sync speed
is automatically set between 1/60 and 1/125 sec.
TTL automatic flash aperture control by meter
ing light reflected from the film plane. Fill-in
flash is possible.