Self-timer function – Canon EOS 850 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-timer Function
The self-timer function delays shutter release
for 10-seconds to include yourself in the
picture.
1) Set the selector dial to “ 0”.
2) Put the AF frame over the subject, and
press the shutter button halfway.
3) Make sure the symbols are not blinking,
and press the shutter button completely.
• The beeper tone sounds slowly, and then
rapidly two seconds before the picture is
taken.
• Set the selector dial to another position to
cancel this function.
• Be sure to place the camera on a steady sur
face, or use a tripod.
• If you are the subject, put the AF frame on
an object located where you will be.
• If your eye will not be at the viewfinder
when the shutter is released, use the view
finder cover on the neckstrap as shown to
prevent stray light from entering.
47