Canon EOS 850 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading the Film
A pre-wind film system utilized in this
camera immediately winds the film to the
end when loaded. During shooting, the frame
counter shows the remaining number of
frames left as the film is rewound into the
cartridge.
Use only DX-coded 35mm film. Film without
a DX-code is set to ISO 25.
1) Open the back cover by pushing the latch
down while pressing the lock release
button.
2) Insert the film cartridge as shown.
3) Carefully pull the film tip across until it
reaches the orange mark.
4) Make sure that the film perforations are
properly engaged with the sprocket teeth.
5) Close the back cover. The camera immedi
ately advances the film to the end of the
roll.
6. Film Handling
25