Selecting the language, Select the switch language mode, Select the language – Canon Z90W User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Imprinting Captions
Selecting the Language
Language Caption No.
1
Select the Switch
Language mode.
• Press the Ell button for
more than 2 seconds.
LANGUAGE blinks.
^ The caption number
reverts to No 1 for each
language.
Select the language.
• Each time the CB button is
pressed, the language
changes sequentially from
E (English) to F (French) to
D (German) to ES
(Spanish)
• Press the Eil button to
make your selection.
Use 12, 24 or 36-exposure film that bears the DX
marking. If you use film with other numbers of
exposures, it may not be possible to imprint the date or
caption on the final shots.
i
‘ To imprint a caption only, set the date display to
“.........” (-»47) and then select the caption.
• The caption is cleared after each photo is taken. To
imprint the caption in successive photos, press the DCI
button for more than 2 seconds. CAPTION, on the
LCD panel, blinks.
When this occurs, the caption number reverts to No. 1
for each language so press the
SET
(ES or [B)
button to select the desired caption number.
0
51