Canon Z90W User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Date and Time

Set the date and time.

I • Press the CC button to set

the date.

• Repeat steps 3 and 4 to set

all the date and time

settings

• If you press the IB3 button

and none of the date

settings blink, date setting

is complete

> Each time you replace the battery, the date display on

the LCD panel reverts to "......... When this occurs,
set the date and time.

• Each time the CC button is pressed, the number

increases by one If kept pressed, the number
increases quickly.

• If you press the CW button when is blinking, the

seconds display is set to zero.

■ If you do not perform any operation for about 10

seconds, the ▼ ihdicator goes off, and normal state

Is automatically entered. In that case, correctly

reperform the operations from step 1.

0-49