Canon Z90W - Manual (Page 46)

Remote Control Photography
Replacing the Remote Control Battery
Replace the battery when you can no longer use the
remote control to take photos.
Battery: one CR2032 3V lithium battery
1
Pull out the battery
holder.
• Use a pen or other pointed
implement to push in the
release button ’T) as you
slide the battery holder out
',2 .
Load a new battery Into
the holder and fit the
holder back into the
remote control.
• Ensure that the + and -
terminals are positioned
correctly.
• Remote control photography may not be possible it
the remote control sensor on the camera is exposed
to sunlight or strong fluorescent light. In such
situations, use the self-timer to take the picture, or
move the camera to another location.
• The camera’s remote control function may not operate
correctly if the camera is close to a fluorescent light
during signal reception If this occurs, move the
camera away from the fluorescent light.
•
• Remote control shots can be taken for the 4 minutes
that Si is displayed.
• Set the camera on a steady surface or use a tripod.
• The focus lock function can be used in the same way
as in normal photography (-> 42)
0-46