Canon Ixus M 1 - Manual (Page 40)

Setting and Adjusting the Date/Time
After changing the battery, or when traveling
internationaliy, it may be necessary to set or adjust the
camera's date and time using the following procedure.
If “............ ” blinks on the LCD panel when you
change the battery, perform steps 2, 3, 4, and 6.
DATE button Press the DATE button to
display the Date mode.
• The time is set in Date +
Time mode, step 5
Select button
Press the Select button.
• Use the push-button
projection on the strap
clasp.
^ When you replace the
battery, the blinking
....... ” display changes to
‘"98 1 r.
• The digits to be set start
blinking.
ITil
\ k
Press the Set button. * •
• Use the push-button
projection on the strap
clasp,
• Press repeatedly until the
blinking digits show the
desired value.
Set button
li-40