Canon Ixus M 1 - Manual (Page 19)

Checking the Battery Power
Check that I"!' is displayed on the LCD panel
when the power is turned on.
Shooting capacity with a new battery - Approx. 22
film cartridges of 25 exposures, at normal
temperatures with 50% flash use. (Data based on
Canon’s Standard Test Method.)
i'98 9 80“’'
CZE
\
_________________
1
V,
Battery Check Indicator
1^ (Lit): Battery is full
EI3 (Lit): Have a new battery ready
EZDi (Blinks): Replace the battery (^ 15)
• Use one lithium battery (CR2).
■ Before shooting, be sure to check the battery
power. I
• The shooting capacity is reduced to about 1/3 of
normal if the camera is used at low temperatures. |
• When traveling or planning to take many pictures, j
be sure to take a supply of spare batteries, they I
may not be available where you are. j
■ Shooting continuously with the flash will cause the
battery power to fall momentarily, and the LCD
panel display may be incorrect. Turn the power off!
I
and wait a while before turning it back on. I
S-19