Press + and - buttons to scan minute display, Minute display rotates through 60 minutes. ^^9, Press date button when correct minute is shown – Canon E 430 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2<^35VPM
>93
2:35 PM
20.OCT.1993
11. Press + and - buttons to scan minute
display.
• Minute display rotates through 60 minutes. ^^9
00 ■«-)■ 01 .«-»• 02 ■«-> —»» ■«-»■ 58 ■<-> 59 <-|
12. Press DATE button when correct minute is
shown.
• Minute display stops flashing and auto date and time starts
* •
functioning. ^33
• Press DATE button again to make dispiay disappear from
viewfinder.
22
N otes:
•
The date can be set between 1 January, 1992, and 31 December, 2011.
• Date and time cannot be set during camera recording or in playback mode.
• If you change or remove the lithium battery without a power source attached, the date and time are
cleared from memory.
• Reset date and time when you travel to a different time zone.
• To make a partial change to date or time settings, follow steps 1 and 2 on page 19. Then press SHIFT
button to select settings to change. When finished, press DATE button.