Chest top without task light, Crrftsmrn – Craftsman 706.596690 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CRRFTSMRN
CHEST TOP WITHOUT TASK LIGHT
Tools Required:
Screwdriver, Crosstip
Chest top removal
• Disconnect power from unit.
• Remove pull out work surface. (See
drawer installation and removal.)
• Remove enough drawers to reach the
top back inside of the unit. (See
Drawer installation and removal.)
• Remove lock retaining clip. Pull lock
out to remove.
• Remove (4) screws holding top in
place.
• Remove top from unit.
Chest top installation
• Position top on unit. Attach using (4)
screws.
• Position lock in unit. Install retaining
clip to hold lock in place.
• Make sure the back of the lock rod is
inserted into the lock rod holder in the
back of the unit.
• Push the lock rod toward the back of
unit the and line up with lock. Insert
the lock rod into the back of the lock.
• Test lock operation.
• Reinstall drawers.
• Reconnect power to the unit.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA
F1616