Drawer and work surface replacement – Craftsman 706.596690 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DRAWER AND WORK SURFACE REPLACEMENT
Tools Required:
Drill
5/32" Drill bit
Rivet gun
Crosstip screwdriver
Removal
• Remove drawer or work surface from
unit. (See Drawer and Work surface
installation and removal.)
• Carefully drill out rivets holding slides
to drawer.
• Rotate front of slide down and out.
• Pull slide forward to remove.
Drawers only
• Remove striker. (See striker
replacement.)
• Remove drawer front. (See drawer
front replacement.)
Installation
• Install slides on new drawer or work
surface. (Install back hangers first.)
• Install rivets to hold slides in place.
Drawers only
• Install striker. (See striker
replacement.)
• Install drawer front. (See drawer front
replacement.)
Drawers and work surface
• Install drawer or work surface in unit.
See drawer and work surface
installation and removal.
Right side
Slide