Samsung VR5160 - Manual (Page 23)

VCR Operation
Record!
Recording while you watch
1
Insert a video cassette with the record protect safety
tab intact. Check the tape speed. If the VCR indica­
tor on the front panel is not lit, press the
TV/VCR
button.
Select a channel to record by pressing CH/TRK VA
or the number buttons.
Press the REC button on the remote control or the
front of the VCR. The REC indicator will light.
If you want to edit out unwanted material during
recording, press the P/STILL button while recording
and the VCR will pause. To resume recording, press
the P/STILL button again.
To end recording, press the STOP button.
CTO r
u
/ n
VCR
L 11 I LI
(TO I I 1 1 ~
VCR
L 11 I LI
CTO i j r f
vcR /\ /_
L
Separate Recording and Viewing
You can view a different program from the on you’re recording if your VCR is connected to your antenna
or cable system. When using a cable decoder box, use an A/B switch.
While recording on one channel, press the TV/VCR button on the remote control to select TV viewing. The VCR
indicator light on the front display shuts off. Select the channel you want to watch with the TV’s channel buttons.
1
Insert a video tape, check the tape speed, and select
the channel you want to record, using the CH/TRK
▼ A or number buttons.
Press the REC button on the remote control or the
front of the VCR the number of times that corre­
sponds to length of record time you desire (see chart
below). The Record length time appears on the
screen.
The VCR will turn off automatically at the end of the
recording time. To stop an OTR recording in
progress, press the
POWER button on the remote
control or on the front of the VCR.
RECORD Display Record time
Press once Record Not timed.
Press 2 times 0:30 30mins
Press 3 times 1:00 1 hour
Press 4 times 1:30 1 hour + 30 mins
Press 5 times 2:00 2 hours
Press 6 times 3.00 3 hours
Press 7 times 4:00 4 hours
Press 8 times Record Not timed
19