Tape coni, Slow motion, Replay – Samsung VR5160 User Manual

Page 19: Shuttle buttons, V-lock, Automatic tracking (a.trk), Key lock, Vcr operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VCR Operation

Tape Coni

REPLAY

Slow Motion

Press the

SLOW

+ or - button while a cassette is playing for slow motion.

Press the

SLOW

buttons repeatedly to vary slow motion speed from 1/5 to 1/30 of normal

playback.

Press the

PLAY

button twice to resume normal viewing.

Replay

Press the

REPLAY

button when a video is playing at normal speed or in slow motion, and the

VCR will rewind for about five seconds of material in SP mode or about fifteen seconds in SLP

mode, then play back the section again.

Shuttle Buttons

Shuttle buttons on the remote control offer one-touch search speed playback.
Press 6 to advance or 4 to reverse playback in play mode. Playback speed is determined by

how many times you press the shuttle button.

V-LOCK

During still mode, press the

V-LOCK

buttons to reduce picture “jitter” (bouncing up and down).

A small amount of “jitter” or some “streaks” are normal during still viewing.

A.TRK

Automatic Tracking (A.TRK)

Press the

A.TRK

button to automatically adjust cassette tracking.

Key Lock

If you do not want others to operate the VCR (for example if you have programmed a timer recording) you can set

the VCR to lock out all button controls.

Press and hold the

TV/VCR

button on the remote

control for 5 seconds. The VCR display will show

“SAFE” when the feature is activated.

To resume normal mode, press and hold the

TV/VCR

button again for 5 seconds. “SAFE” will

disappear and the VCR will operate normally.

n r r

J n r c

This manual is related to the following products:

VR8160