Setting, Setting the source, Memorizing the channels – Samsung VR5160 User Manual
Page 15: Setting the clock, Setting the channels, Vcr setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
VCR Setup
mamm
Setting
Once the VCR memorizes all the available channels, you can use the CH/TRK
T A
buttons to select channels.
Setting the Source
Before the VCR can memorize available channels, you must set the signal source for your VCR.
I
With the VCR on, press the
MENU
button.
Press ▼ and ► to select “CHANNEL SETUP.”
2
If you have a cable system hooked up to your VCR,
leave CABLE TV displayed in the Ant/Cable screen.
If you have an antenna hooked up to your VCR, press
► until ANTENNA appears. Press the
MENU
button
when you have selected the correct signal source.
Memorizing the Channels
1
Press the
MENU
button. Press ▼ and ► to select
“CHANNEL SETUP.”
Press ▼ and ► to start Auto channel memory function.
Your VCR will begin memorizing all available channels.
To Interrupt, press the
MENU
button on the remote con
trol. When the channel number on screen stops chang
ing, the VCR has finished.
Timer recording
Clock set/adjust
► Channel setup
VCR function setup
Language/Lengua/Langue
[MENU/EXIT]
CHANNEL SETUP
► Ant/Cable; [CABLE TV]
Auto channel memory
Channel add/delete
[▼A/^]
[MENU/EXIT]^
CHANNEL SETUP
► AnVCable:
[ANTENNA]
Auto channel memory
Channel add/delete
[
t
A/^]
[MENU/EXIT]^
Timer recording
Clock set/adjust
► Channel setup
VCR function setup
Language/Lengua/Langue
[
t
A/H
[MENU/EXIT]
CHANNEL SETUP
Ant/Cable:
[CABLE TV]
► Auto channel memory
Channel add/delete
[
t
A/>.]
[MENU/EXIT]^
Memorizing CH 02
please wait
11