Craftsman 113.299780 - Manual (Page 9)

MOUNTING INLET BRACKET
1. Locate the follow ing item s from the loose parts bag:
Description C3ty.
A Flat W ashers* (5/16 x 11/16 xi/i6)................... 2
B H ex Screw s* (M 8 x 1.25 -12).......................... 2
C Flat W ashers *{1/4 X 1/2).................................2
D H ex Screw s* (M 6 x 1 -12)................................ 2
2. Insert Inlet Bracket betw een relief flange of Inlet
Guard and against inside edge of angle flange on
Support Leg. M ake sure both holes on Bracket align
w ith sim ilar holes on Leg Support.
3. Place 5/16 flat w asher on hex screw , insert through
Leg hole and attach to threaded hole of Bracket.
4. R epeat sam e process for other hole and secure with
use of adjustable w rench.
5. Attach Fixed Clamp as shown, by placing flat washer
on hex screw, insert hex screw through hole of Fixed
Clamp and attach to threaded hole of inlet Guard
Bracket
6. R epeat step 5 to attach other screw below Inlet
Guard.
7. Tighten all screws on Legs. Inlet Guard, and Filtration
Housing securely.
MOUNTING BASE PLATE
1. Locate the follow ing item s from the loose parts bag:
Description Qty.
A Flat W ashers* (5/16 x 11/16x1/16)...................... 4
B Hex Screws* (M 8 x 1.25 - 12)...................... .........4
2. Attach Base Plate to Leg Supports by flipping base
upside dow n, aligning holes on both Leg Supports.
3. Place flat w asher on hex screw , insert through hole of
Leg and attach to threaded holes in Base Plate as
show n.
4. R epeat sam e process for other three holes and
secure w ith adjustable w rench.
5. W ith the assistance of another person, carefully flip
the O ust Collection System right side up.
gli
' items are shown actual size
CLAMP AND BRACKET
MOUNT HERE
(o) gni
Items are shown actual size
FIXED CASTERS
SWIVEL CASTERS