Adjustments (normal mode), Before adjusting, 1 pré» the option button – Sony GDM-W900 User Manual
Page 9: 2 press the ■ii-f/'t' button to select "osd menu, 3 press the button to select normal, 1 press thetit (brightness) ■f/'t button, 1 press the 3 (contrast) button, 2 press the button again to adjust picture, Contrast, F/'t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustments (Normal mode)
You can adjust five picture to your preference.
This monitor has two levels of adjustment mode, normal
and expert.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select "LANGUAGE" in the "OPTION" OSD, then select
"ENG" (English) on page 8.
Ws 'ШЙ i 15 L
1
Pré» the OPTION button.
The "OPTION" OSD appears.
OPTION
OPTICW
►LANGUAGE «JPN -ENG -FRA
•DEU ‘ESP -ITA
OSD POSITION: RIGHT BOTTOM
OSD MENU iNOFMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT; BNC 84.4kHz/72Hz
0 Q SELECT
SET
2
Press the ■ii-f/'t' button to select "OSD MENU."
The "OSD MENU" becomes yellow.
+
OPTION
LANGUAGE -JPN -ENG -FRA
■DEU -ESP -ITA
OSD POSITION: RIGHT BOTTOM
►OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC 84.4kHz/72Hz
n a SELECT
В В
SET
3
Press the
button to select NORMAL
Move the green ■ to NORMAL.
- Э +
±J
OPTION
LANGUAGE
-JPN -ENG -FRA
■DEU -ESP -ITA
OSD POSITION: RIGHT ВОТТШ
►OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC
84.4kHz,' 72Hz
0 0
SELECT
В В
SET
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
in - и '. f - I'
' r M
The adjustment data becomes the common setting for all
input signals received.
1
Press theTiT (brightness)
■f/'t
button.
The "BRIGHTNESS/CONTRAST" OSD appears.
- * +
2
Press the button again to adjust picture
brightness.
4^... for less brightness
4 ... for more brightness
The OSD automatically disappears after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast are both reset.
The adjustment data becomes the common setting for all
input signals received.
1
Press the 3 (contrast) button.
The "BRIGHTNESS/CONTRAST" OSD appears.
2
Press the
button again to adjust picture
contrast.
4"... for less contrast
■ ♦ • . . . for more contrast
The OSD automatically disappears after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast are both reset.