Adjustments (expert mode) – Sony GDM-W900 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjustments (Expert mode)
You can adjust more in detail in the expert mode than in the
normal mode.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select "LANGUAGE" in the "OPTION" OSD, then select
"ENG" (English) on page 8.
1 Press the OPTION button.
The "OPTION" OSD appears.
OPTION
OPTION
►LANGUAGE »JPN -ENG -FRA
■DEU -ESP -ITA
OSD POSITION: RIGHT BOTTOM
OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC 84,4kHz/72Hz
B B SELECT a B SET
2 Press the ii-f/t button to select "OSD MENU."
The "OSD MENU" turns yellow.
-
I
OPTION
LANGUAGE -JPN -ENG -FRA
•DEU -ESP -ITA
OSD POSITION: RIGHT BOTTOM
►OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC 84.4kHz/72Hz
B B
SELECT
B e SET
3 Press the
button to select "EXPERT."
Move the green ■ to EXPERT.
appears at the top right comer of the OSD in
Expert mode.
- 3 +
im
OPTION
LANGUAGE
-JPN -ENG -FRA
•DEU -ESP -ITA
OSD POSITION: RIOIT BOTTOM
►OSD MENU •NORMAL -EXPERT
LOCK
■UNLOCK -LOCK
INPUT: BNC
84,4kHz/72Hz
B B
SELECT
S B
SET/ADJUST
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
K*—
The adjustment data becomes the common setting for all
input signals received.
1 Press the button or the
button.
The "BRIGHTNESS/CONTRAST" OSD appears.
BRIGHTNESS/CONTRAST
►(•CONTRAST
!■
" 1 10
•&BRIGHTNESS 1» I 23
№ESET
-1 -2 -3
B B
SELECT
8 B
SET/ADJUST
2 Press the ■Cl'f/♦ button to select "PRESET" and the
9
button to select a preset number.
When you want to use the monitor later in the same
condition, just select the same preset number.
3 Press the button or the
button to
adjust the brightness or contrast
BRIGHTNESS:
Adjusts the picture brightness.
3
CONTRAST:
Adjusts the pictiure contrast.
The OSD automatically disappears after about 30 seconds.
To tiun off the OSD, press the ♦ or
button
again.
To reset, press the RESET button while the OSD is on. The
selected preset number is reset
13