Sony GDM-W900 - Manual (Page 8)

Selecting the OSD
Language
Japanese, English, French, German, Spanish, or Italian
versions of OSD are available.
1 Press the OPTION button.
The "OPTION" OSD appears.
OPTION
2 Press the button to select "LANGUAGE.'
— ^ + OPTION
►LANGUAGE ■JPN -ENG -FRA
•DEU -ESP *ITA
OSD POSITION: RIGHT BOTTOM
OSD MENU
•NORMAL -EXPERT
LOCK •UNLOCK -LOCK
INPUT: BNC 84.4kHz,'72Hz
Q D SELECT B B SET
3 Press the button to select the desired
language.
- 3 +
b
JPN: Japanese, ENG: English, FRA: French,
DEU: German, ESP: Spanish, IT A: Italian
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
Changing the OSD
Position______________
You can change the OSD position, for example, when you
want to adjust the picture behind the OSD.
1 Press the OPTION button.
The "OPTION" OSD appears.
2 Press the lii f/f button to select "OSD POSITION".
- - f t +
ft)
OPTION
LANGUAGE •JPN -ENG -FRA
■DEU -ESP -ITA
►OSD POSITION: RIGHT BOTTOM
OSD MENU •NORMAL -EXPERT
LOCK ■UNLOCK -LOCK
INPUT: BNC 84.4kHz,' 72Hz
D D
SELECT
B B
SET
3 Press the 9^/^ button to move the OSD to the
desired position.
- 3 +
b
The "OPTION" OSD automatically disappears after about 30
seconds. To turn off the OSD, press the OPTION button
again.
Operating the OSD
Select a parameter using the 1' buttons in the OSD
which parameters are arranged in vertical row, md adjust or
select the setting of the selected parameter using the
9-^/buttons.
To select a parameter to adjust or select the setting,
press or ♦ button.
The green ► mark goes to the selected parameter and the
parcimeter becomes yellow.
— ^ +
I.
To adjust or select the settings of the selected parameter,
press or ^ button.
When adjusting, the bar length md the figure increase or
decrease.
When selecting the setting, the green ■ goes to the selected
setting. _
+
US
b
8