Sony GDM-W900 - Manual (Page 16)

Control Lock
Function
The control lock function disables all the buttons on the
front panel except the (!) (power) and OPTION buttons and
the INPUT switch.
1 Press the OPTION button.
The "OPTION" OSD appears.
%
OPTION
►LANGUAGE -JPN -ENG -FRA
•DEU -ESP -ITA
OSD POSITION: RIGHT BOTTaJl
OSD MENU -NORMAL -EXPERT
LOCK
-UNLOCK -LOCK
INPUT: BNC 84,4kHr/72Hz
B 0 SELECT e B SET
2 Press the 13 4/t button to select "LOCK."
3 Press the button to select “LOCK."
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
Once you select "LOCK," you carmot select other item on
the "OPTION" OSD using the li 't' button.
If
you press any button other than the (!) (power) and
OPTION buttoiTS and the INPUT switch, the Ofl mark
appears on the screen.
To cancel the control lock
Press the O ■♦■/“♦ button to select "UNLOCK."
Note
Use the control lock function only when necessary.
Degaussing the
Screen
The screen of the monitor is automatically degaussed when
the power is turned on (page 3).
You can degauss manually.
1 Press the SCREEN button.
The "SCREEN" OSD appears.
SCREEN SCREEN
►H CONVERGENCE I 85
V CONVERGENCE Wmmmm ~1 72
CANCEL MOIRE •OFF -ON
MOIRE ADJ r ■ ■ 1 0
LANDING ADJUST—
DEGAUSS •ON
D 0 SELECT B fi SET/ADJUST
2 Press the button to select "DEGAUSS."
3 Press the 3 ^ button.
The screen is degaussed for about five seconds.
16