Sony GDM-W900 - Manual (Page 10)

Adjustments (Normal mode)
f ' i =
Irii)
The adjustment data becomes the individual setting for each
input signal received.
1 Press the CENT button.
The "CENTER" OSD appears.
CENT
2 For vertical adjustment
Press the 'I'/1 buttons.
— ■ij' +
b
4^... to move down
4 • ■ • to move up
For horizontal adjustment
Press the 9 • 4 “ / b u t t o n s .
- 3 +
• ^ . . . to move left
^... to move right
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the CENT button again.
To reset, press the RESET button while the OSD is on. The
horizontal and vertical centerings are both reset.
The adjustment data becomes the individual setting for each
input signal received.
1 Press the SIZE button.
The "SIZE" OSD appears.
SIZE
SIZE
S3 0
23
Zl 0 H !■
10
□ 0
10
2 For vertical adjustment
Press die 4/4 buttons.
- +
b
4.. . to decrease
4.. . to increase
For horizontal adjustment
Press the 3 ■4“/^ buttons.
- 3 +
±3
b
◄ " . . . to decrease
^... to increase
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the SIZE button again.
To reset, press the RESET button while the OSD is on. The
horizontal and vertical sizes are both reset.
79
The adjustment data becomes the common setting for all
input signals received.
1 Press the GEOM button.
The "GEOMETRY" OSD app>ears.
GEOM
6E0WETRY
Q
□ IM □ OB W"" 1B
23 10
2 Press the buttons.
— -iCi- +
4
... to rotate counterclockwise
■ f ' . . . to rotate clockwise
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the GEOM button again.
To reset, press the RESET button while the OSD is on. The
picture rotation and the pincushion settings are both reset.