Sony TC-KA3ES - Manual (Page 6)

Basic Operations
Playing a Tape
2 3
See page 7 for hookup
information.
Q* To play a tape recorded
with the Dolby NR system
Set DOLBY NR to the same
position that the tape was
recorded in—B, C, or S.
You can connect the
headphones to PHONES
To adjust the volume, turn
PHONES LEVEL.
1 Turn on the amplifier and select the tape deck position.
Set TIMER to OFF and press POWER.
Press ►.
The cassette holder closes and the deck starts playing. "TAPE"
and the tape type (1,11, or IV) appear in the display. Adjust the
volume on the amplifier.
To Press
Stop playing ■
Pause II PAUSE. Press the button again to
resume play.
Fast-forward or rewind ►► or when the deck is stopped
Take out the cassette = OPEN/CLOSE after stopping playing