Cleaning, Demagnetizing the heads, Cleaning the heads and tape path – Sony TC-KA3ES User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Additional Information
Cleaning
Inside of the cassette holder
Demagnetizing the heads
After 20 to 30 hours of use, or when you notice a
hissing sound or loss of high frequencies, demagnetize
the heads with a commercially available demagnetizer
for tape decks. Please refer to the instructions of the
demagnetizer.
POWER 60PEN/CL0SE
Cleaning the heads and tape path
Clean the heads and tape path of the tape deck after
every 10 hours of operation to guard against;
• a decrease in sound level
• excessive wow or flutter
• sound dropout
• incomplete erasure
To ensure better recording, we recommend that you
clean the heads and tape path before every recording.
1
Set the volume control on the amplifier to
minimum.
2
With the tape deck fumed off, hold down = OPEN/
CLOSE and press POWER. The holder opens, the
heads rise, and the pinch rollers begin to rotate.
3
Wipe the heads, the pinch rollers, and the capstans
with a cotton swab slightly moistened with alcohol
or a commercially available cleaning fluid for tape
decks.
4
When completed, press = OPEN/CLOSE again.
Do not insert a cassette until the cleaned areas are
completely dry.
14