Sony TC-KA3ES - Manual (Page 5)

Basic Operations
'Q' You can check how much
blank remains on the tape
1 Locate the end of the
recorded portion on the tape.
2 Press RESET to reset the tape
counter to "0.00."
3 Press ►► to fast-forward the
tape to its end.
The tape counter shows the
approximate amount of
remaining time.
Dolby noise reduction and HX
Pro headroom extension
manufactured under license from
Dolby Laboratories Licensing
Corporation. HX Pro originated
by Bang & Olufsen.
"DOLBY, " the double-D symbol
□□ and "HX PRO" are
trademarks of Dolby Laboratories
Licensing Corporation.
Start playing the program source.
To Press
Stop recording ■
Pause II PAUSE. Press the button again to
resume recording.
Take out the cassette = OPEN/CLOSE after stopping
recording
Use these buttons (controls) for additional operations
RESET MPX FILTER
I_______ L
HX PRO REC LEVEL
naca
m
EEI
® <$! ®
«> O ®
tape counter DOLBY NR
To adjust the recording balance
Turn REC LEVEL so that the L (left channel) and R (right channel) peak level
meters in the display are at the levels you want. For normal settings, keep
the red mark on each control aligned with each other.
To increase the left (L) channel
level only, turn the outer control
clockwise. To increase the right (R) channel
level only, turn the inner control
clockwise.
To record with the Dolby NR* system
Set DOLBY NR to the position you want (B, C, or S) before you start recording.
To record with Dolby HX PRO
Press HX PRO. "HX PRO" appears in the display. The HX PRO button and
indicator are provided on TC-KA3ES only. (For details on HX PRO, see
"Glossary" on page 17.)
If you cannot get satisfying results when recording FM broadcasts
with Dolby NR system
Set MPX FILTER to ON. The filter turns on to make the Dolby NR system
work more effectively. "FILTER" appears in the display. (For details on the
MPX filter, see "Glossary" on page 17.)
■