Sony TC-KA3ES - Manual (Page 12)

Advanced Recording Operations
Recording Using a Timer
You can start recording on a tape at any time you want
by connecting a timer (not supplied). Please also refer
to the instructions of the timer if you need help.
1
2
Insert a cassette.
On the amplifier, select the program source you
want to record.
3 On the tape deck, set TIMER to REC.
4 Set the timer to the time you want.
The tape deck turns off. When the set tíme comes,
the tape deck turns on and start recording.
5 After you have used the timer, set TIMER on the
tape deck to OFF.
Note
If the TIMER switch is set to REC, the tape deck will
automatically start recording when you turn on the tap>e deck.
Synchro-Recording With a CD
Player (Canadian Model Only) m
By pressing CD SYNCHRO START on the remote
(supplied with the Canadian model only), you can
perform synchro-recording on your tape deck with a
Sony CD player. This function is possible only with
Sony CD players with remote control capability.
CD SYNCHRO-
(STOP/START/STANDBY)
a a ±]
a Q a
□ Q r~l a a a
CCSVNCHHO
Q CD Q
CASsetTt oecK
1 Insert a CD into the CD player.
2 Insert a cassette into the tape deck.
3 Press CD SYNCHRO STANDBY on the remote. The
CD player changes to play pause and the tape deck
to recording pause.
4 Press CD SYNCHRO START on the remote. The
tape deck starts recording, and then the CD player
starts playing.
To stop Synchro-Recording
Press CD SYNCHRO STOP.
To pause Synchro-Recording
Press II for the tape deck and CD player at the same time.
Press both buttons again to resume Synchro-Recording.
You can use the remote of your tape deck to operate
the CD player
To start CD play, press II twice; to pause CD play, press
II once; to locate a CD track, press or ►►!.
12