Monitoring the recorded sound, To listen to the sound of the program source, Q' to insert a blank space longer than 4 seconds – Sony TC-KA3ES User Manual
Page 11: To insert a blank space of less than 4 seconds, Advanced recording operations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Monitoring the Recorded Sound
You can compare the quality of the recorded sound
with the sound of the program source while recording.
MONITOR
While recording, press MONITOR repeatedly until
"TAPE" appears in the display.
You can monitor the sound being recorded.
To listen to the sound of the program source
Press MONITOR repeatedly until "SOURCE" appears in the
display.
Advanced Recording Operations
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between each
track. The blank spaces between tracks let you locate
the track easily with the AMS function (see page 9).
Also, use this function to eliminate only unwanted
portions on the tape.
#REC
1
2
Start recording.
Press O REC MUTE once when you want to insert a
blank space.
The REC indicator starts flashing and the tape
moves on without recording any signals.
After 4 seconds, the II PAUSE indicator lights up
and the tape deck is now ready to resume
recording.
3
Press
I I
PAUSE or ►- to resume recording.
'Q' To insert a blank space longer than 4 seconds
Hold down O REC MUTE as long as you want. After 4
seconds, the REC indicator flashes faster.
When you release the O REC MUTE, the II PAUSE
indicator lights up and the tape deck is ready to resume
recording.
Press
II
PAUSE or ► to restime recording.
To insert a blank space of less than 4 seconds
After pressing O REC MUTE, press II PAUSE at any
time. The deck changes to recording pause. To resume
recording, press • REC instead of
II
PAUSE,
11