Canon i 900D - Manual (Page 29)

28
(1) Display the image you want to print in the Replay Replay Replay Replay mode.
If the camera will not change to the Replay Replay Replay Replay mode, refer to your digital camera
user's manual's instructions for changing the camera to the Replay Replay Replay Replay mode.
will display on the LCD display of the digital camera when the printer is
correctly connected.
(2) Press the SET SET SET SET button to display the Print Print Print Print menu.
(3) Select Style Style Style Style and specify the Paper Paper Paper Paper size, Bordered Bordered Bordered Bordered or Borderless Borderless Borderless Borderless printing, and
date printing On or Off.
(4) After specifying the style, specify a number of copies, select Print Print Print Print and then
press the SET SET SET SET button.
Notes z For the digital camera operation and troubleshooting, refer to your digital
camera manual. For print error message, refer to “Cannot Print Properly from
the Digital Camera” on page 46.
z For the digital video camcorder operation, print error messages, and
troubleshooting, refer to your digital video camcorder manual.
z You can make the following prints directly from a digital camera:
- A standard print from the image displayed in the single display mode or in
the index display mode.
- Specified numbers of images, or an index print using the DPOF function.
* Images other than Exif may not be index printed.
- The images taken with Exif 2.2 compatible digital camera will be adjusted
by using the Photo Optimizer PRO function.
- If date printing is set on the digital camera, the date of shooting will be
printed (excluding the index print).
- Images will be scaled automatically according to the size of the media set
on the digital camera.
z The digital camera does not support the following functions:
- Print quality setting
- Maintenance
* The print head cannot be aligned through the digital camera. To align the
print head, use the operation panel of the printer.
z To disconnect the cable connected between the digital camera and printer,
follow the procedure below:
1.Disconnect the cable from the printer.
2.Turn off the digital camera.
3.Disconnect the cable from the digital camera. When disconnecting the
cable, be sure to hold the connector by its sides.