Printing a specified area - trimming – Canon i 900D User Manual

Page 17

Specify the number of copies to print.

(1) Using the

buttons, select the image you wish to print.

(3) Repeat steps 1

1 and 2

2 and specify the number of copies for each image you wish

to print.

(4) Press the OK

OK button.

The print confirmation screen is displayed.

Start printing.

(1) Confirm the print settings. To change any of the settings, press the Settings

Settings

button.
See “Specifying the Paper and Optimizing Images” on page 23.

(2) Press the Print

Print button.

The specified number of copies for each image will be printed.

Printing a specified area - Trimming

When Trimming

Trimming

Trimming is displayed below Specify images

Specify images

Specify images, Select layout

Select layout

Select layout, Printing an Image

Printing an Image

Printing an Image,

the image displayed can be trimmed.

Note

For each image selected you can also set the area to print using the
Trimming function.

See “Printing a specified area - Trimming” below.

Note

Please trim the image after specifying the Paper Size

Paper Size

Paper Size, Paper Type

Paper Type

Paper Type,

Borderless/Bordered

Borderless/Bordered on each settings screen. If you change the
settings after trimming the image, the trimming selection will be lost.

(2) Use the

buttons to specify the number

of copies to print.