Resetting the date and time, To correct the date and time settings, To check the preset date and time – Sony CCD-TR700 User Manual
Page 44: Note on the setting of the year, Note on the time indicator, T_____________ i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the Date and Time
Before setting the clock, make sure a power source and lithium battery are installed.
(1)
Press DATE (+) and TIME (NEXT) simultaneously for about 3 seconds until dale indicator flashes in
the display window.
(2)
Adjust the digits of the year, month, day, hour and minutes by pressing DATE
(+) and TIME (NEXT). Note that when you keep DATE (+) pressói, the digits advance faster.
To Correct the Date and Time Settings
Repeat steps I and 2.
To Check the Preset Date and Time
Press DATE (+) to display the date indicator in the display window and the viewfinder.
Press TIME (NEXT) to display the time indicator.
When you press the same button again, the indicator goes off.
Note on the setting of the year
When you set the year, each time you press DATE (+) the digits change as follows.
1994 ->1995 -►----------- >2023
t_____________ I
Note on the time indicator
The internal clock of the camcorder operates on a 12-hour cycle.
12:00:00 AM stands for midnight. 12:00:00 PM stands for noon.