Focusing manually, When to use manual focus, To reactivate auto focusing – Sony CCD-TR700 User Manual
Page 27: Shooting in relatively dark places, Note on the focus ring
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Manually
When to Use Manual Focus
Use manual focus under the following conditions:
[dl
>
Insufficient light
[a]
»Subjects with little contrast-walls, sky, etc. [b]
• Too much brightness behind the subject [cj
>
Horizontal stripes
[d]
• Subjects through frosted glass
• Subjects beyond nets, etc.
>
Bri^t subject or subject reflecting light
»Shooting a stationary subject when using a tripod
Focusing Manually
When focusing manually, first focus in telephoto before recording, and then reset the shot length.
(1)
Open the AUTO LOCK cover until it clicks.
(2* ~
viewfinder and display window.
(3)
Keep the po'
(4)
Turn the focus ring to adjust the focus.
(5)
Set the desired shot length.
clicks.
(2)
Press FOCUS. The focus indicator appears in the
iwer zoom button to the T side until the zooming stops.
V 1 eAUTOiOCK '
—!—. \
c d
\ m
\
2
------------’ \
c d
\
FOCUS
o
To Reactivate Auto focusing
Press FOCUS again, or close the AUTO LOCK cover. The focus indicator in the viewfinder and display
window disappears.
Shooting in relatively dark places
Shoot at wide angles after focusing in telephoto.
Note on the focus ring
The focus ring does not have a stop position.
S
0»
3
e
27