Sony SPP-A700 - Manual (Page 31)

Picking up new messages
1 Call your phone from a touch-tone phone.
2
When you hear the greeting, enter dD, followed by your security code.
You hear a long confirmation beep and the greeting stops. Following the
number of messages recorded, you'll hear the new messages.
If there are no new messages, the phone stands by for you to enter a
control code.
3
To do other operations, enter the control code within 20 seconds (see the
table below). To quit, hang up the phone.
Control codes for remote operations
To
ri,iv back mos.sago.s
Repeat the current message
Skip the current message
Erase the current message
Erase all the messages
Recorci a new greeting
(up to one minute)
Turn on the answering function
Turn off the answering function
Stop the current operation
Press
db CD
d) CD
d) (T) while the message is being played back
d) CD when your phone is waiting for further codes
CD CD. When you hear a long beep, start recording your
greeting. Press CD CD to stop recording.
(D®^ _ ____________ _______________
CD^_______________________________ __________
(D CD
If you forgot to turn the answering function on
Call your phone and let it ring 10 times until it answers. Then the
answering function automatically turns on.
Notes
• If you have not recorded the greeting, the phone docs not answer.
• If you enter a wrong security code three times, the line will be disconnected.
Tip
Cut off the Remote Control Card from the supplied Quick Start Guide and carry
it with vou to see how to operate from an outside phone.
To use the toll-saver feature
Set RINGER SELECT to TS. See page 26 for details.
Answering Machine Features 31